Company Logo Applying Labels

Depending on the media type, barcode labels are either stickers that are adhered to the front of the tape cartridge or cutouts that you slide into an indentation on the front of the cartridge. Adhesive labels should be fixed centrally within the cartridge recess provided. When applying adhesive labels, rubber gloves should be worn to prevent moisture from the skin contaminating the adhesive. Optimum temperature over 10 degrees C. Some examples are shown below.

WARNING

Do not use wraparound labels on DLT cartridges.
Most labels use a removable adhesive and have a tendency to curl or tear after multiple uses. This can jam the mechanical movement of the drives and the media picker. Place labels only in the space provided on the cartridge.

QUALSTAR
Using - Qualstar DLT SAIT and LTO02

HP LTO TYPE
Using - HP LTO02

GENERAL DLT
Using - DLT02

IBM, ADIC LTO TYPE
Using - ADIC LTO02

STORAGETEK DLT
Using STK DLT03

STORAGETEK LTO
Using STK LTO03

© 2000-2008 Netc Asia Pacific Pty Ltd. All rights reserved